Tableflags and tablebanners

 

Tableflags, tablebanners, tablestands

By default, table flags and table banners are printed by Fahnen Kössinger as flags of almost all countries of the world, all German states, and in special production, with company or club logos.

Further down on this page, you also find suitable tablestands in wood or metal in various executions.
Place an inquiryin catalogue
+49 (0)9451-93130
This email address is being protected from spambots. You need JavaScript enabled to view it.

Product details

Material
one-layer printing on polyester 60 g/m²
two-layer printing on special silk or satin

Shapes
rectangular or pentangular
Formats15 x 25 cm, 16 x 24 cm or 20 x 30 cm

Finishing
Banner with cord all around and cord hanging
Flags with seams all around, thin rope at the side
 
 
 
 
Tableflag Germany with wooden tablestand 
 

Tableflag (without stand)

  • Format abt. 15 x 25 cm
  • one-layer printing, printed through, motive reversely visible on the backside
  • all German states and almost all nations of the world are available
  • quality polyester, abt. 60 g/m²
  • digital printing, little rope at the side
 
 
 
 
tableflag in special printing with wooden tablestand 
 

Tableflag in special printing (without stand)

  • Format 15 x 25 cm
  • one-layer printing, printed through, motive reversely visible on the backside
  • all German states and almost all nations of the world are available
  • quality polyester, abt. 60 g/m²
  • digital printing, little rope at the side
  • printing files necessary
 
 
 
tablebanner standard nations and states of Germany with crossbar and cord 
 

Tablebanner (without stand)

  • Format abt. 16 x 24 cm
  • same motive printed on both sides
  • made of special silk
  • crossbar with acorn-shaped finials and white cord
  • with cord all around and cord hanging
  • all German states and almost all nations of the world are available
 
 
 
 
tablebanner in special printing with cord all around and cord hanging 
 

Tablebanner in special printing (without stand)

  • Format abt. 15 x 25 cm oder 20 x 30 cm
  • printing on one or on both sides
  • basic quality satin
  • with cord all around and cord hanging
  • printing files necessary
 
 
 
 
Metal tablestand in various executions 
 

Metal tablestand

Our metal tablestands are available in chrome and gold plating, each for tablebanners (with a little hook below the pole top) and tableflags (with holes in the top and a pin at the bottom end of the pole for attaching the little rope).

Noted are the standard heights of the poles, ask us about special lengths. The differentiation is made according to the execution of the bases.

Standard
  • Height 42,5 cm
  • Base diameter 9,5 cm
  • Base height abt. 4 mm
with cantilever
  • Height 42,5 cm
  • Base diameter 9,5 cm
  • Base height abt. 4 mm
  • Cantilever up to 15 cm
Special
  • Height 40 cm
  • Base diameter 9 cm
  • Base height abt. 7 mm
Exklusive
This stand is also suitable for several flags/banners. Additional poles are arranged around the center pole in a slightly oblique way so that the flags are spread like a fan.
  • Height 42,5 cm
  • Base with two steps
  • Base diameter 7,5 cm und 6,0 cm
  • Base height 2,5 cm
 
 
 
 
Wooden tablestand in various executions 
 

Wooden tablestand

Our wooden tablestands can be distinguished by the different execution of the shaped base. The wood is natural colored and lacquered. For tablebanners, the poles have a little hook below the pole top and tableflags come with holes in the top and a pin at the bottom end of the pole for attaching the little rope.

Standard
  • total height 45 cm
  • with smooth base
  • diameter 8,5 cm
Exklusive
  • total height 53 cm
  • base diameter 11,2 cm
 
 
 
 
Katalogansicht